Cored Wires

Flux Cored Arc Welding (FCAW) wires are used for:

– joining

– repairing

– hard-facing

– cladding

Metalex flux cored wires and metal cored wires are available in sizes ranging from 1.2mm to 3.2mm.

– low alloys, high alloys and stainless-steel welding wires are produced according to the AWS standards

– hardfacing products in compliance with DIN EN 14700 standards.

Product category

Hardfacing

Category	Code	Standard		Application
Low alloy	SHIELD 60- OA	EN 14700	T Fe8	SHIELD 60 is Tubular wire for self shielded metal arc hardfacing •Martensitic weld metal with good abrasion and impact resistance •Especially applicable in 2-3 layers for wear resistance
	CH-295	EN 14700	T Fe6	Austenitic weld deposit, high plasticity and acts as a buffer layer, work hardening, the deposit resists to stress and impact loading
	CH-600	EN 14700	T Fe3	For abrasion and impact resistance hardfacing, used for multilayer welding, crack free, hard and though
	CH-620	EN 14700	T Fe8	Martensitic microstructure with inserted Titanium-Carbide for cement crusher rolls, pulveriser rolls and hammers,
Anti Abrasion	METALCORE 60- OA	EN 14700	T Fe15	metalcore 60 is a tubular wire that deposits an alloy with high C and Cr contents, highly resistant to abrasion with medium impact. The weld metal contains a high proportion of primary Cr carbides in a tough martensitic matrix. It can be used even in corrosive environments.
	CA-600	EN 14700	T Z Fe14	High Cr-C alloyed steel, excellent resistance to abrasion for wear plates,
	CA-720	EN 14700	T Fe15	High Cr-C-Nb alloyed steel, excellent resistance to abrasion in higher temperature, for mixers, Ni-hard cones, wear plates,
	CA-780	EN 14700	T Fe 16	High Cr-C-Nb-V-W alloyed steel, for hardfacing against extremely heavy mineral wear, resistance to abrasion in high temperatures, blast furnace bells, augers.
Manganesic	CM-190	EN 14700	T Z Fe10	Austenitic weld deposit, corrosion resistance, heat resistance, thermal shock resistance, ductile buffer on old hardfacing layers, for joining dissimilar steels.
	CM-210	EN 14700	T Fe9	Suitable for welding Manganese Steels (Hadfield), resistance to high impact wear and tear, crack free, work hardening, rebuilding of crusher jaws, rail road components, bucket teeth and lips,
	CM-230	EN 14700	T Fe9	High manganese and chromium, corrosion resistance, buffer layer specially for old harfacing layer, work hardening,
Ferritic-martensitic	CF-230	EN 14700	T Fe7	For joining similar ferritic Cr- steels and cast steels, suitable for sealing surfaces on water, steam and gas valves,
	CF-414S	EN 14700	T Fe7 CZ	Continous casting roll
	CF-420	EN 14700	T Fe8 C	Good corrosion-resistant in atmosphere

Cored Wires

Cored wires

Product category

Get Your Free Quote Right Now

Istanbul

New York

Amsterdam